aquarium reef tank dosing tube holders
Organizes dosing tubes at a sump edge and helps prevent additives from running down the tank wall.
About this 3D design
Organizes dosing tubes at a sump edge and helps prevent additives from running down the tank wall.
A set of aquarium dosing-tube holders intended to reduce precipitation and liquid tracking down the side of a sump. The creator recommends printing the holder on its side with supports.
- Creator
- al_mooring
- Provider
- Thingiverse
- Access
- Free / Open
- License
- CC BY
- Material
- PETG
- Difficulty
- Advanced
This is a curated external reference. The creator’s files remain on the original provider, where you can review the license, instructions and latest version.
Browse by grow use case
All categories
Official GEIA
3D Model of the GEIA IoT Hydroponics Automation Board v2 for Aquaponics & Aeroponics
Provides a dimensional reference for planning enclosures, mounting and integrations around the GEIA ESP32 controller board.
External reference only
Stackable Hydroponic Tower
Adds modular vertical planting capacity while keeping a recirculating hydroponic build compact and expandable.
External reference only
Corner joint for wooden stake
Useful for building light greenhouse, crop-protection or strawberry frames from readily available wooden stakes.
External reference only
120 MM fan to 4 in tube
Connects a standard fan to ducting for greenhouse or grow-tent ventilation and airflow control.
External reference only
Housing for BME280 Temperature / Humidity / Pressure sensor.
Protects a BME280 while allowing environmental measurements around greenhouses or indoor growing areas.
External reference only
Glasshouse rain gutter end
Routes greenhouse roof runoff into a downpipe, supporting tidy rainwater collection or drainage.
External reference only
SpiderFamer "SF-Heater" - Hot-Air-Outlet-Diffuser & Sensor Mount
Improves heater airflow around plants and provides a movable sensor hanger for greenhouse temperature management.
External reference only
clip for garden tunnel 1/2" pipe
Secures plastic film, bird netting or shade cloth to small hoop-tunnel frames without permanent fasteners.
External reference only
greenhouse downpipe with mesh and slopes
Screens debris from greenhouse runoff before it enters a pipe, reducing clogs in drainage or collection lines.
External reference only
1" PVC Pipe Clip
Provides a reusable way to fasten greenhouse film or other coverings to 1-inch PVC frames.
External reference only
Tomato holders
Helps train tall tomato vines sideways when they reach the greenhouse roof, extending usable growing space.
External reference only
Enclosure for environment measurement module.
Combines a small ESP controller, environmental sensor and battery in a ventilated greenhouse-monitoring enclosure.
External reference only
GrowBox Stuff
Offers printable grow-box accessories aimed at airflow circulation and practical plant-space organization.
External reference only
Vegetables signs/labels
Keeps vegetable varieties clearly identified in seed trays, pots, greenhouse beds or small research trials.
External reference only
Atlas Scientific Dual Probe Holder
Keeps water-quality probes paired and organized during hydroponic, aquaponic or reservoir measurements.
External reference only
Simple PH meter holder (no support)
Provides a simple resting place for a handheld pH meter near a hydroponic reservoir or workbench.
External reference only
pH Probe and Temperature Probe Holder
Positions pH and temperature probes together for temperature-compensated water measurements in grow systems.
External reference only
Over-engineered DHT22 / AM2302 Board Case
Protects a DHT22/AM2302 sensing board used for temperature and humidity monitoring in growing spaces.
External reference only
AZDelivery 2-Channel Relay Module Case
Encloses a specific two-channel relay board used to switch pumps, fans, lights or other grow equipment.
External reference only
Mountable case with lid for 2 channel relay board
Adds mounting protection for a two-channel relay board in small irrigation, lighting or ventilation control builds.
External reference only
2-Channel Relay Module Case
Protects a SainSmart two-channel relay module used in small grow-room or irrigation automation projects.
External reference only
8 channel relay board case
Protects an eight-channel relay board that can coordinate several pumps, valves, fans or lights in one controller.
External reference only
4-Channel Relay Module Case
Encloses a four-channel relay module for multi-output automation of pumps, fans, lighting or dosing equipment.
External reference only
ESP32 Cam Case (Ball Joint mount)
Provides an adjustable enclosure for ESP32-CAM crop monitoring, timelapse or machine-vision experiments.
What should I print it with?
Match the filament to heat, moisture, UV and chemical exposure—not only to printability.
Easy to print for brackets, labels and prototypes. Avoid warm, sun-exposed or continuously wet locations.
A practical default for moisture, splashes and reservoir accessories. Verify compatibility with concentrated nutrients or cleaners.
Better resistance to UV, weather, heat and many chemicals. Verify the exact chemical and print with ventilation.
“Food-safe filament” alone is not enough. Layer lines, additives, nozzle contamination and coatings matter; use certified parts for prolonged nutrient-water contact.
Build parts that growers actually need.
Submit sensor brackets, water-probe holders, dosing clips, camera mounts, controller cases and greenhouse accessories.
