Other Accessories 3D Prints
Curated printable parts for sensors, probes, hydroponics, reservoirs, camera mounts, grow rooms and GEIA-compatible builds.
Browse by grow use case
All categoriesOther Accessories for grow systems
This collection brings together useful grow-system accessories that do not fit one specialized category.
Review the GEIA use-case note, specifications and original listing before printing. Confirm dimensions, material, license and the conditions in which the part will be used.
Official GEIA
3D Model of the GEIA IoT Hydroponics Automation Board v2 for Aquaponics & Aeroponics
Provides a dimensional reference for planning enclosures, mounting and integrations around the GEIA ESP32 controller board.
External reference only
Stackable Hydroponic Tower
Adds modular vertical planting capacity while keeping a recirculating hydroponic build compact and expandable.
External reference only
Corner joint for wooden stake
Useful for building light greenhouse, crop-protection or strawberry frames from readily available wooden stakes.
External reference only
120 MM fan to 4 in tube
Connects a standard fan to ducting for greenhouse or grow-tent ventilation and airflow control.
External reference only
Glasshouse rain gutter end
Routes greenhouse roof runoff into a downpipe, supporting tidy rainwater collection or drainage.
External reference only
SpiderFamer "SF-Heater" - Hot-Air-Outlet-Diffuser & Sensor Mount
Improves heater airflow around plants and provides a movable sensor hanger for greenhouse temperature management.
External reference only
clip for garden tunnel 1/2" pipe
Secures plastic film, bird netting or shade cloth to small hoop-tunnel frames without permanent fasteners.
External reference only
greenhouse downpipe with mesh and slopes
Screens debris from greenhouse runoff before it enters a pipe, reducing clogs in drainage or collection lines.
External reference only
1" PVC Pipe Clip
Provides a reusable way to fasten greenhouse film or other coverings to 1-inch PVC frames.
External reference only
Tomato holders
Helps train tall tomato vines sideways when they reach the greenhouse roof, extending usable growing space.
External reference only
GrowBox Stuff
Offers printable grow-box accessories aimed at airflow circulation and practical plant-space organization.
External reference only
Vegetables signs/labels
Keeps vegetable varieties clearly identified in seed trays, pots, greenhouse beds or small research trials.
External reference only
AZDelivery 2-Channel Relay Module Case
Encloses a specific two-channel relay board used to switch pumps, fans, lights or other grow equipment.
External reference only
Mountable case with lid for 2 channel relay board
Adds mounting protection for a two-channel relay board in small irrigation, lighting or ventilation control builds.
External reference only
2-Channel Relay Module Case
Protects a SainSmart two-channel relay module used in small grow-room or irrigation automation projects.
External reference only
8 channel relay board case
Protects an eight-channel relay board that can coordinate several pumps, valves, fans or lights in one controller.
External reference only
4-Channel Relay Module Case
Encloses a four-channel relay module for multi-output automation of pumps, fans, lighting or dosing equipment.
External reference only
Super Cloner for Plants
Supports compact plant propagation where cuttings need a shared aeroponic or irrigated rooting chamber.
External reference only
GrowHIVE - 3D Printable Seedling Starting Kit
Improves seed-starting airflow, drainage and spacing before seedlings move into a greenhouse or grow system.
External reference only
Hydroponic System (Fixed and Refined)
Adds tighter joints and guided water delivery to a modular tower, making recirculation and reservoir integration easier.
External reference only
Dani's Indoor Grow Towers
Provides a modular indoor tower for water-efficient recirculating cultivation in limited floor space.
External reference only
Vertical Modular Hydrpoponic Farm
Offers a compact vertical hydroponic structure for indoor, urban or small-footprint food production.
External reference only
Modular Hydroponic Tower Garden
Fits modular hydroponic planting into smaller printers while routing the water supply through the tower center.
External reference only
LettusStack - HydroPonic Garden - scale to any size!
Scales vertical hydroponic capacity by stacking chambers fed from one small pump and top supply line.
What should I print it with?
Match the filament to heat, moisture, UV and chemical exposure—not only to printability.
Easy to print for brackets, labels and prototypes. Avoid warm, sun-exposed or continuously wet locations.
A practical default for moisture, splashes and reservoir accessories. Verify compatibility with concentrated nutrients or cleaners.
Better resistance to UV, weather, heat and many chemicals. Verify the exact chemical and print with ventilation.
“Food-safe filament” alone is not enough. Layer lines, additives, nozzle contamination and coatings matter; use certified parts for prolonged nutrient-water contact.
Build parts that growers actually need.
Submit sensor brackets, water-probe holders, dosing clips, camera mounts, controller cases and greenhouse accessories.
