Sensor Mounts 3D Prints
Curated printable parts for sensors, probes, hydroponics, reservoirs, camera mounts, grow rooms and GEIA-compatible builds.
Browse by grow use case
All categoriesSensor Mounts for grow systems
Printable sensor mounts help position climate, light and environmental sensors where their readings represent the crop rather than a wall, lamp or air inlet.
Browse brackets and holders for grow tents, racks, greenhouse frames and indoor farms. Check the original design dimensions before printing, keep sensors exposed to representative airflow and choose PETG or ASA when heat, moisture or sunlight make PLA unsuitable.
External reference only
Housing for BME280 Temperature / Humidity / Pressure sensor.
Protects a BME280 while allowing environmental measurements around greenhouses or indoor growing areas.
External reference only
SpiderFamer "SF-Heater" - Hot-Air-Outlet-Diffuser & Sensor Mount
Improves heater airflow around plants and provides a movable sensor hanger for greenhouse temperature management.
External reference only
Enclosure for environment measurement module.
Combines a small ESP controller, environmental sensor and battery in a ventilated greenhouse-monitoring enclosure.
External reference only
pH Probe and Temperature Probe Holder
Positions pH and temperature probes together for temperature-compensated water measurements in grow systems.
External reference only
Over-engineered DHT22 / AM2302 Board Case
Protects a DHT22/AM2302 sensing board used for temperature and humidity monitoring in growing spaces.
External reference only
ESP32 Cam Case (Ball Joint mount)
Provides an adjustable enclosure for ESP32-CAM crop monitoring, timelapse or machine-vision experiments.
External reference only
Stevenson screen with Filter
Shields greenhouse climate sensors from sun, dust and splashes while maintaining airflow around the readings.
External reference only
Radiation shield sensor mount/weather station controller
Improves outdoor climate sensing by shielding temperature and humidity sensors and housing their controller together.
External reference only
ESP32 Wemos D1 Case with BMP280 sensor mount
Combines an ESP32 Wemos D1 and BMP280 in a separated enclosure to reduce controller heat affecting readings.
External reference only
Temperature Sensor Mount, radiation shield
Reduces solar heating errors when measuring greenhouse or outdoor air temperature and humidity.
What should I print it with?
Match the filament to heat, moisture, UV and chemical exposure—not only to printability.
Easy to print for brackets, labels and prototypes. Avoid warm, sun-exposed or continuously wet locations.
A practical default for moisture, splashes and reservoir accessories. Verify compatibility with concentrated nutrients or cleaners.
Better resistance to UV, weather, heat and many chemicals. Verify the exact chemical and print with ventilation.
“Food-safe filament” alone is not enough. Layer lines, additives, nozzle contamination and coatings matter; use certified parts for prolonged nutrient-water contact.
Build parts that growers actually need.
Submit sensor brackets, water-probe holders, dosing clips, camera mounts, controller cases and greenhouse accessories.
