No products in the cart.
Start Free
Create your account, explore the platform and simulate your setup.
- Free platform access
- Simulated devices
- Basic dashboards & automations
- No credit card required
Open. Modular. Integration-first.
The open platform behind your grow automation
Connect GEIA nodes, DIY boards, third-party sensors, scripts and custom devices using GEIA firmware, MQTT and REST API integrations. Monitor, automate, analyze and scale your grow from one powerful platform.
VPD
0.98
kPa optimal
pH
6.21
Stable
EC
1.32
mS/cm
Temp.
25.6°
C optimal
◌Edge-firstLocal control options
⌘Open API & MQTTBuild custom integrations
盾Secure & ReliableLocal control & sync
⬡Modular & ScalableStart small, scale big
🔒No Vendor Lock-inYour data, your control
Choose your path
Start with software, build your own system, or connect tested GEIA hardware. You can expand later.
Build DIY
Use Arduino / ESP32 guides or flash GEIA firmware to build your own system.
- DIY guides & examples
- Custom sensors
- Firmware tools
- Community support
Connect or Buy Hardware
Use compatible sensors, boards, APIs or tested GEIA nodes.
- Compatible sensors
- GEIA nodes and gateways
- MQTT / REST API devices
- Third-party integrations
You set the growing strategy. GEIA runs the loop.
Choose the environment, targets, schedules and safety limits. GEIA combines sensors, manual inputs and connected equipment to monitor, act, verify and alert.
Reservoir control exampleTarget: pH 5.9 · EC 1.30 · Level 80%
Read water conditions
Sensors and manual tests create the current state.
Level62%
EC1.08
pH6.3
＋Manual readings also workEnter a handheld pH/EC result in the app.
Apply your settings
GEIA compares the current state with targets, schedules and safety rules.
Active ruleEC below target after level checkWithin approved dosing window
Fill, mix and dose
Only the devices and limits selected by the grower are used.
- Open fill valve
- Dose 18 ml nutrients
- Wait and mix
Measure the result again
The next reading confirms success—or triggers an alert.
- Reservoir reached 80%
- Action saved to history
- Alert if response is unusual
🛡
Safe by design: unexpected readings can stop the sequence and notify the grower instead of repeating an unsafe action.
Data-guided growing
See what changed. Improve what happens next.
Automation creates consistent data—not automatic wisdom. Charts, events and timelapse help you understand the result, then adjust targets and recipes with evidence.
Grow performanceReservoir + crop view
Last 24 hours · Leafy 03Electrical conductivity1.30 mS/cm
Back in range08:12Nutrient dose08:17Mixing08:31Target verified
- 01ObserveReadings, images and events
- 02CompareTargets, actions and cycles
- 03AdjustYou refine rules and recipes
- 04ImproveRun the next informed cycle
GEIA does not remove the grower from the process. It makes each adjustment measurable, repeatable and easier to improve.
Build your GEIA system →
⏱
Save Time
Automate routine tasks and reduce manual work.
📈
Improve Consistency
Keep conditions stable across cycles.
💧
Optimize Inputs
Track water, nutrients, energy and devices.
⬢
Scale Confidently
From monitoring to edge infrastructure.
🛡
Future Proof
Open standards, APIs and local options.
One platform, different grow environments
Select your grow type and see what GEIA can monitor and automate.
Indoor grow room automation
GEIA helps monitor climate, VPD, CO₂, lighting, safety and device status across your grow room.
Monitors
Automates
Monitors
Temperature, humidity, VPD, CO₂, light, pressure, air quality, motion, camera and device status.
Automates
Lights, fans, humidifiers, dehumidifiers, CO₂, alarms, schedules and fail-safes.
How GEIA turns hardware into automation
From devices to local control, platform intelligence, APIs and optional edge infrastructure.
🌡
Devices
Sensors, pumps, lights, relays, cameras, meters and custom machines.
▣
Nodes / DIY Boards
GEIA nodes, ESP32 / Arduino with GEIA firmware, or MQTT devices.
⚙
Gateway / Edge
Local control, buffering, offline automation and secure sync.
☁
GEIA Platform
Dashboards, rules, alerts, history, recipes, reports and app control.
🔗
Integrations
MQTT, REST API, webhooks, apps, dashboards and partner systems.
Platform snapshot
Your hardware, GEIA intelligence
Build a smart grow backend without building a backend. GEIA connects devices, records data, runs automations, shows dashboards and exposes APIs for growers, builders and agtech teams.
Monitoring
Automation
Data history
Recipes
Alerts
API
01
Connect
Nodes, sensors, boards, scripts and machines
02
Collect
Live readings, device states, camera data and grow logs
GEIA Platform
Rules · Dashboards · Alerts · APIs
03
Automate
Schedules, thresholds, recipes, safety logic and remote control
04
Improve
Reports, trends, cycle comparison and operational insights
⬡
Designed for local-first and distributed edge growth
GEIA can run simple monitoring in the cloud, critical automation through local gateways, and heavier workloads through edge infrastructure. Future edge deployments can support local AI, data processing and distributed network capacity without exposing your private grow data.
Platform features
Everything your grow needs to monitor, automate and improve
GEIA combines automation rules, water chemistry, data logging, alerts, app control and integrations into one platform for growers, builders and AgTech teams.
Recipes · Rules · Schedules
Automation & Recipes
Automate your farm and perfect your recipes
Go beyond simple timers. Create repeatable crop recipes that control climate, lighting, irrigation, feeding and stage changes across your grow.
✓
Automate temperature, humidity, CO₂, ventilation and VPD targets.
✓
Build custom light recipes for seedlings, vegetative growth, flowering or production cycles.
✓
Control pumps and irrigation cycles with precise timing.
✓
Create multi-zone schedules for different crops, rooms or grow areas.
✓
Automate crop-stage changes across lighting, feeding and irrigation.
✓
Use mixer tanks and delivery logic for nutrient preparation and distribution.
pH · EC · Dosing
Water & Nutrients
Achieve better water chemistry and nutrient control
GEIA helps monitor and stabilize the water conditions that drive healthy nutrient uptake, especially in hydroponics, aquaponics, reservoirs and dosing systems.
✓
Monitor pH, EC/TDS, water temperature, DO, ORP, level, flow and pressure where supported.
✓
Track water readings and every adjustment over time.
✓
Automate nutrient dosing, acids, bases and correction workflows with DoseMate.
✓
Handle reservoir refill, drainage and water-level logic.
✓
Connect water data to crop recipes, alerts and reports.
✓
Keep manual test-kit readings in the same grow history.
Charts · Logs · Reports
Data & Performance
Learn from data and improve each cycle
GEIA captures sensor readings, manual logs, photos, events and automation history so growers can stop guessing and improve with every grow cycle.
✓
Monitor live and historical data from all zones.
✓
Visualize trends in charts, reports and dashboards.
✓
Log observations, crop photos, manual tests and dosing events.
✓
Add custom fields for the metrics that matter to your grow.
✓
Compare yields, recipes and environmental conditions across cycles.
✓
Use cameras and time-lapses to verify how plants respond.
Alerts · Edge · Fail-safes
Alerts & Reliability
Your farm’s 24/7 intelligent guardian
A smart grow system should be proactive. GEIA helps detect issues early, alert you quickly and keep supported automations running locally when internet access is unreliable.
✓
Get alerts for leaks, pump failures, pH/EC drift, temperature swings or unsafe thresholds.
✓
Detect abnormal patterns that may indicate equipment issues or plant stress.
✓
Keep critical schedules running locally on supported gateways.
✓
Buffer selected data and sync when connectivity returns.
✓
Build fail-safe rules for pumps, fans, dosing, lighting and safety devices.
✓
Reduce risk during nights, weekends and unattended periods.
App · Control · Journal
Mobile App & Remote Control
Control your grow from anywhere
Use GEIA’s app and dashboards to monitor zones, control devices, receive alerts and record what happens in your grow.
✓
View zone status, live sensor values and device states.
✓
Manually control pumps, lights, fans, relays and supported devices.
✓
Receive alerts and review event history.
✓
Log observations, photos, manual tests and grow notes.
✓
Track reservoirs, rooms, crops and grow cycles.
✓
Use the same platform for DIY, GEIA hardware or integrated devices.
MQTT · API · Webhooks
Integrations & API
Connect GEIA to your tools and systems
GEIA is integration-first, so developers, makers and AgTech partners can connect devices, dashboards, scripts, apps and services.
✓
Connect devices with MQTT and REST API endpoints.
✓
Use webhooks, external dashboards and data exports.
✓
Build Home Assistant, Node-RED and Grafana-style workflows.
✓
Connect custom scripts, robotics, cameras or third-party controllers.
✓
Build partner workflows and AgTech integrations.
✓
Use GEIA as a backend layer without always relying on the standard grower app.
Integration support depends on firmware, protocol, gateway, package and implementation. Not all paths are prebuilt one-click integrations.
Three ways to connect your grow hardware
Use GEIA hardware, compatible DIY boards, MQTT devices, REST API scripts or third-party agtech systems.
Plug & Play: GEIA Nodes
Plug-and-play nodes for climate, water, dosing, relays, power control and monitoring.
No-Code: GEIA Firmware
Flash compatible ESP32 / Arduino-class boards and configure sensors from the platform.
Pro-Code: MQTT & REST API
Keep your own firmware, scripts, robots, or dashboards and connect through endpoints.
Edge-first infrastructure
Built for monitoring, automation and life-supporting grow systems with local options.
DIY guides & tools
Everything you need to connect your own devices, firmware and integrations.
Choose your gateway and automation level
Your gateway affects offline capability, device capacity, data history, local storage, and which packages are available.
Cloud / No Gateway packages
Best for monitoring-only setups, platform exploration, dashboards, simulation and non-critical automation.
Automation
Cloud-based, non-critical
Data records
Limited history
Device capacity
Limited sensors/devices
Best for
Testing, monitoring and light automation
| Package | Cloud | Lite | Pro | Edge | Best for |
|---|---|---|---|---|---|
| Free | ✓ | ✓ | ✓ | ✓ | Explore, simulate and start monitoring |
| Grower | ✓ | ✓ | ✓ | ✓ | Small grows and monitoring-first users |
| Pro | Limited | ✓ | ✓ | ✓ | Advanced rules, more data and stronger automation |
| Managed | – | Optional | ✓ | ✓ | Commercial growers, setup help and support |
| Host & Earn | – | – | – | Eligible | Edge infrastructure partners |
Developer and third-party agtech packages are planned separately for teams that want GEIA APIs, data pipelines or network access without using the standard grower app.
For AgTech builders
Build AgTech tools without rebuilding the backend
GEIA can act as a specialized infrastructure layer for agriculture teams, robotics projects, sensor companies, labs and automation builders that need device connectivity, MQTT, data logging, APIs and edge-ready workflows without maintaining their own full backend from day one.
Use GEIA with or without the standard grower app. Partners can connect devices, stream data, build dashboards, trigger automations, integrate external tools and explore edge-based workloads designed for agriculture environments.
📡
Device connectivity
MQTT, REST API, sensors, machines, robotics and custom firmware.
💾
Agriculture data layer
Time-series records, device states, grow logs, alerts and history.
⚙
Automation backend
Rules, schedules, triggers, safety logic and workflow integrations.
⬡
Edge-ready infrastructure
Local gateways and future edge workloads for lower-latency agriculture systems.
🧠
AI workload path
Designed for future local AI, vision analysis and distributed learning workflows.
🔌
Use your own app
Build on GEIA APIs without requiring the standard GEIA grower interface.
Built for an open ecosystem
GEIA connects growers, developers, makers, labs, integrators, robotics teams and agtech providers. Use the platform, build on top of it, or help expand the network.
Integration-ready by design
GEIA is built to connect with external tools, dashboards, scripts, sensors, APIs and business systems.
MQTT-ready
REST API
Webhooks
Home Assistant path
Node-RED path
ROS 2 bridge path
OpenCV bridge path
Grafana-ready data
Time-series data
ESP32
Modbus path
I²C / sensor buses
Commerce workflows
Business systems
Accounting workflows
CRM workflowsThese are integration paths and compatible directions, not all prebuilt one-click modules. Developers, integrators and partners can build on GEIA using APIs, MQTT, webhooks and data exports.
Ready to automate your grow?
Start free, connect hardware, build your own system or join the ecosystem.
