Enclosures & Cases 3D Prints
Curated printable parts for sensors, probes, hydroponics, reservoirs, camera mounts, grow rooms and GEIA-compatible builds.
Browse by grow use case
All categoriesEnclosures & Cases for grow systems
A well-designed enclosure protects grow automation electronics from accidental contact, cable strain, dust and the humid conditions common around plants.
These references include cases for controllers, relay boards, sensor nodes and small gateways. A printed enclosure is not automatically waterproof or electrically certified, so use suitable glands, ventilation, separation and commercially rated protection wherever mains voltage or heavy condensation is present.
Official GEIA
3D Model of the GEIA IoT Hydroponics Automation Board v2 for Aquaponics & Aeroponics
Provides a dimensional reference for planning enclosures, mounting and integrations around the GEIA ESP32 controller board.
External reference only
Housing for BME280 Temperature / Humidity / Pressure sensor.
Protects a BME280 while allowing environmental measurements around greenhouses or indoor growing areas.
External reference only
Enclosure for environment measurement module.
Combines a small ESP controller, environmental sensor and battery in a ventilated greenhouse-monitoring enclosure.
External reference only
Over-engineered DHT22 / AM2302 Board Case
Protects a DHT22/AM2302 sensing board used for temperature and humidity monitoring in growing spaces.
External reference only
AZDelivery 2-Channel Relay Module Case
Encloses a specific two-channel relay board used to switch pumps, fans, lights or other grow equipment.
External reference only
Mountable case with lid for 2 channel relay board
Adds mounting protection for a two-channel relay board in small irrigation, lighting or ventilation control builds.
External reference only
2-Channel Relay Module Case
Protects a SainSmart two-channel relay module used in small grow-room or irrigation automation projects.
External reference only
8 channel relay board case
Protects an eight-channel relay board that can coordinate several pumps, valves, fans or lights in one controller.
External reference only
4-Channel Relay Module Case
Encloses a four-channel relay module for multi-output automation of pumps, fans, lighting or dosing equipment.
External reference only
ESP32 Cam Case (Ball Joint mount)
Provides an adjustable enclosure for ESP32-CAM crop monitoring, timelapse or machine-vision experiments.
External reference only
Stevenson screen with Filter
Shields greenhouse climate sensors from sun, dust and splashes while maintaining airflow around the readings.
External reference only
Radiation shield sensor mount/weather station controller
Improves outdoor climate sensing by shielding temperature and humidity sensors and housing their controller together.
External reference only
ESP32 Wemos D1 Case with BMP280 sensor mount
Combines an ESP32 Wemos D1 and BMP280 in a separated enclosure to reduce controller heat affecting readings.
What should I print it with?
Match the filament to heat, moisture, UV and chemical exposure—not only to printability.
Easy to print for brackets, labels and prototypes. Avoid warm, sun-exposed or continuously wet locations.
A practical default for moisture, splashes and reservoir accessories. Verify compatibility with concentrated nutrients or cleaners.
Better resistance to UV, weather, heat and many chemicals. Verify the exact chemical and print with ventilation.
“Food-safe filament” alone is not enough. Layer lines, additives, nozzle contamination and coatings matter; use certified parts for prolonged nutrient-water contact.
Build parts that growers actually need.
Submit sensor brackets, water-probe holders, dosing clips, camera mounts, controller cases and greenhouse accessories.
