3D-Drucke & Open Designs for Growers
Curated printable parts for sensors, probes, hydroponics, reservoirs, camera mounts, grow rooms and GEIA-compatible builds.
Browse by grow use case
All categories
External reference only
Super Cloner for Plants
Supports compact plant propagation where cuttings need a shared aeroponic or irrigated rooting chamber.
External reference only
GrowHIVE - 3D Printable Seedling Starting Kit
Improves seed-starting airflow, drainage and spacing before seedlings move into a greenhouse or grow system.
External reference only
Hydroponic System (Fixed and Refined)
Adds tighter joints and guided water delivery to a modular tower, making recirculation and reservoir integration easier.
External reference only
Dani's Indoor Grow Towers
Provides a modular indoor tower for water-efficient recirculating cultivation in limited floor space.
External reference only
Vertical Modular Hydrpoponic Farm
Offers a compact vertical hydroponic structure for indoor, urban or small-footprint food production.
External reference only
Modular Hydroponic Tower Garden
Fits modular hydroponic planting into smaller printers while routing the water supply through the tower center.
External reference only
LettusStack - HydroPonic Garden - scale to any size!
Scales vertical hydroponic capacity by stacking chambers fed from one small pump and top supply line.
External reference only
Rotating Modular Hydroponics garden
Adds rotation to a hydroponic tower so plants can receive more even access to light or workspace access.
External reference only
Modular Hydroponic System
Creates an expandable hydroponic tower around standard net cups, a small reservoir and recirculation pump.
External reference only
Modular Hydroponics Tower w/ Grow Lights
Combines a tall modular hydroponic tower with expandable grow-light arms for indoor cultivation.
External reference only
Radiation shield sensor mount/weather station controller
Improves outdoor climate sensing by shielding temperature and humidity sensors and housing their controller together.
External reference only
ESP32 Wemos D1 Case with BMP280 sensor mount
Combines an ESP32 Wemos D1 and BMP280 in a separated enclosure to reduce controller heat affecting readings.
External reference only
Temperature Sensor Mount, radiation shield
Reduces solar heating errors when measuring greenhouse or outdoor air temperature and humidity.
External reference only
Microdrip hose or sprayer mount
Provides a compact mounting point for micro-drip hose or mist sprayers in irrigation and propagation setups.
External reference only
Irrigraion halo dripper for 10cm (4 inch) rockwool cube
Distributes irrigation around a 10 cm rockwool cube for more even wetting in hydroponic cultivation.
External reference only
1/4" Straight Connectors for Irrigation Systems
Replaces broken straight fittings in quarter-inch irrigation tubing without buying a full connector pack.
External reference only
Solenoid holder for custom irrigation system
Secures a low-cost irrigation solenoid to a backplane for cleaner valve installation and servicing.
External reference only
16 cm irrigation hose holder
Keeps 16 mm irrigation tubing positioned on plant trays for repeatable drip-line routing.
External reference only
Hose Irrigation Adapter
Adapts a garden hose to multiple small irrigation lines for distributing water to beds or containers.
External reference only
13-16mm hose end for irrigation system
Closes the end of common irrigation hose sizes to simplify small drip-system installation or repair.
External reference only
End Closure for Irrigation
Seals the end of half-inch irrigation tubing for quick repairs, extensions or custom drip layouts.
External reference only
Drip Irrigation Ring
Spreads drip irrigation around container plants and can be resized for different pots or crop layouts.
External reference only
Irrigation Stakes
Keeps quarter-inch drip, sprayer and drop-hose lines tidy and correctly positioned around changing crop layouts.
External reference only
irrigation dripper clip
Anchors flexible 4 mm drip tubing beside plants so emitters stay positioned during irrigation.
What should I print it with?
Match the filament to heat, moisture, UV and chemical exposure—not only to printability.
Easy to print for brackets, labels and prototypes. Avoid warm, sun-exposed or continuously wet locations.
A practical default for moisture, splashes and reservoir accessories. Verify compatibility with concentrated nutrients or cleaners.
Better resistance to UV, weather, heat and many chemicals. Verify the exact chemical and print with ventilation.
“Food-safe filament” alone is not enough. Layer lines, additives, nozzle contamination and coatings matter; use certified parts for prolonged nutrient-water contact.
Build parts that growers actually need.
Submit sensor brackets, water-probe holders, dosing clips, camera mounts, controller cases and greenhouse accessories.
